IMPORTANT: This booklet should be left with the user after installation and demonstration REDRING EXPRESSIONS 550S SMART TECHNOLOGY ELECTRIC SH
10 5. Re-Fit the front cover (see diagram 9) a. Ensure Knob “E” is aligned at the “6 o’clock” position. b. In the main body of the shower, turn th
11 : Full details of terms and conditions are available on request from:- APPLIED ENERGY PRODUCTS LIMITE
12 HOW TO USE YOUR EXPRESSIONS 550S SHOWER (SUMMARY) IMPORTANT WARNINGS! DO NOT SWITCH THE APPLIANCE ON IF YOU SUSPECT IT OF BEING FROZEN. WAIT
2 INTRODUCTION If you experience any difficulty with the installation or operation of your new shower, then please refer to the “What to do if thing
3 IF WATER IS TOO COLD Turn Knob “E” anti-clockwise in the direction of the “red arrows” to “11 o’clock”. The “Temp Ready” light may go out.
4 1. Water is heated instantaneously as it flows over the heating elements in the copper cylinder (diagram 2). 2. The heaters are only switc
5 HOW TO MAINTAIN YOUR EXPRESSIONS 550S SHOWER It is recommended that the shower unit and hose etc. be cleaned using a soft cloth and that the use o
6 WHAT TO DO IF THINGS GO WRONG (2) REDRING AFTER SALES SERVICE PROFESSIONAL SERVICE If the previous “Self Help” checks fail to restore the perform
7 WARNING: ALL WIRING AND INSTALLATION MUST BE SUPERVISED BY A SUITABLY QUALIFIED PERSON. WARNING: DO NOT INSTALL THIS SHOWER WHERE IT MAY BE
8 7. If you have not yet done so, remove the front cover assembly by undoing the retaining screws at the top and bottom of the unit and lifting the
9 c) ELECTRICAL WARNING: THIS SHOWER MUST BE EARTHED. The electrical installation must be in accordance with the current BS.7671 (IEE Wiring R
Comments to this Manuals